Sliding Glass Door Sizes - When it comes to maintaining your house in tiptop shape, nothing can be frustrating than a sliding glass door which won't slide. After all, what is the purpose of having a gorgeous glass door which leads out to a picturesque backyard if the darn thing takes three NFL linebackers to slide it open? So having personally experienced such sliding glass door angst, I decided to write this article to inform you of the number 1 reason why your sliding glass door won't slide - and what you can do about it! The number 1 reason why your sliding glass door won't drawback is that a lot of dirt and debris have clogged up the wheels and the track of your door panel. This is not a hard fix, but because nearly all sliding glass doors are quite heavy, it's best if you've got another individual present to aid you.
The first step would be to analyze how your sliding glass door is fixed into the track. The vast majority of sliding glass doors have a strip which runs along the surface of the frame that holds the doorways in vertical orientation, positioning the wheels to fit neatly over the sliding path. To start, let's use a simple screwdriver to remove that strip on very top. When the strip is removed, gradually tilt the door from the frame, then eliminate it from the frame altogether. Turn the door on its side and also analyze the wheels at the bottom of the door. Bear in mind, some sliding glass doors can be upwards of 90 pounds, so either acquire some aid or become quite confident on your physical ability.
Most commonly, you will discover the wheels are filled with soot and debris, and the track can also be likely quite dirty. To wash the wheels, use compressed air and needle tip pliers. Take care to pull every last hair from the wheel bearings. It's wise to be diligent in this step, so you don't need to make a habit of this procedure. When the wheels are completely clean, spray a little bit of peppermint oil to the wheel bearings, turning the wheel as you apply the oil. (The ideal choice for your oil is DuPont's Teflon non-stick dry film lubricant.) It's just as important to clean out the track that the wheels rest on.
Use damp paper towels to remove the grit and dirt, and then spray the penetrating oil along the track so it's well-applied. Use a clean paper towel to ensure it's evenly applied. This is the point where the sliding door meets with another surface of the door frame. A general guideline is to just wipe down anything which looks dirty. Bear in mind, even if the dirt is not necessarily on the track itself, it may finally collapse into the track causing your door to require down another wipe. If you become aware of any breeding advantages that feel sticky, take a paper towel and spray some oil onto it, then wipe out the oil onto the sticky surfaces. After you've done all this, reinstall the door. You should notice right away that the door is much easier to slide, and should require significantly less effort.
If for any reason the door remains difficult to rollup, it's likely one of these reasons: either your wheels are burnt out, or your sliding glass door is sitting too high on the track and is thus hitting the upper plate of the door frame. |} If your wheels are burned out, sadly, you are going to need to call the manufacture of your sliding glass door and request new wheels. If on the other hand, your door is hitting the upper plate of your door frame, you can correct this by finding the screw holes at the very bottom of your sliding glass door. Turn to the right to lift the door, or switch to the left to lower the door.