Most Secure Sliding Glass Doors - When it comes to keeping your house in tiptop shape, nothing could be frustrating than a sliding glass door which won't slip. After all, what is the purpose of owning a gorgeous glass door which leads out to a picturesque backyard if the damn thing takes three NFL linebackers to slip it open? So having personally experienced such sliding glass door angst, I decided to write this report to inform you of the number 1 reason why your sliding glass door won't slip - and what you can do about it! The number 1 reason why your sliding glass door won't drawback is that a lot of debris and dirt have clogged the wheels up and the course of your door panel. This is not a hard fix, but since most sliding glass doors are rather heavy, it is wise if you've got another individual present to help you.
The first step is to analyze how your sliding glass door is repaired to the monitor. The majority of sliding glass doors have a strip which runs along the top of the framework that holds the doorways in vertical alignment, positioning the wheels to fit neatly over the sliding path. To start, let's use a very simple screwdriver to remove that strip at the very top. Once the strip is removed, slowly tilt the door from the frame, then eliminate it from the frame altogether. Turn the door on its side and also analyze the wheels at the bottom of the door. Remember, some sliding glass doors could be upwards of 90 lbs, so either acquire some help or become quite confident on your physical skill.
Most commonly, you will discover the wheels are filled with soot and debris, and the track is also likely quite filthy. To clean the brakes, then use compressed air and needle tip pliers. Be careful to pull every last hair from the wheel bearings. It is prudent to be diligent at this measure, so you don't need to make a habit of this process. Once the wheels are totally clean, spray a tiny bit of peppermint oil to the wheel bearings, turning the wheel as you apply the oil. (The ideal choice for your petroleum is DuPont's Teflon non-stick dry film lubricant.) It is equally important to clean the track that the wheels rest on.
Use damp paper towels to remove the grit and soil, and then spray on the penetrating oil along the trail so it is well-applied. Use a clean paper towel to make sure it is evenly applied. This is where the sliding door matches with any other surface of the door frame. A general rule of thumb is to just wipe down anything which seems filthy. Remember, even when dirt is not necessarily on the trail itself, it can finally fall to the trail causing your door to require another wipe down. If you become aware of any mating edges that feel sticky, take a paper towel and then spray some oil onto it, then wipe the oil onto the sticky surfaces. After you've done all this, reinstall the door. You should note right away that the door is a lot easier to slip, and should require significantly less effort.
When for any reason the door remains tough to roll, it is likely one of these reasons: either your wheels are completely burned out, or your sliding glass door is sitting too high on the trail and is consequently hitting on the top plate of the door frame. |} If your wheels are burned out, unfortunately, you are going to need to call the production of your sliding glass door and ask new wheels. If on the other hand, your door is hitting on the top plate of your door frame, you can correct it by finding the screw holes at the very bottom of your sliding glass door. Turn to the right to lift the door, or turn to the left to lower the door.