Outside Locks For Sliding Glass Doors - If it comes to keeping your home in tiptop shape, nothing could be more annoying than a sliding glass door that won't slip. After all, what is the purpose of having a beautiful glass door that leads into a scenic backyard if the darn thing takes three NFL linebackers to slip it open? So having personally experienced such sliding glass doorway angst, I decided to write this report to inform you of the number 1 reason why your sliding glass door won't slip - and what you can do about it! The number 1 reason why your sliding glass door won't drawback is that a lot of debris and dirt have clogged up the wheels and the course of your door panel. This isn't a difficult fix, but since nearly all sliding glass doors are rather heavy, it is wise if you have another individual present to aid you.
Step one is to analyze how your sliding glass door is fixed into the monitor. The majority of sliding glass doors have a strip that runs along the surface of the frame that holds the doors in vertical alignment, placing the wheels to fit neatly over the sliding path. To start, let us use a simple screwdriver to remove that strip on top. Once the strip is removed, slowly tilt the door from the frame, then remove it from the frame completely. Turn the doorway on its side and analyze the wheels at the base of the door. Remember, some sliding glass doors could be upwards of 90 lbs, so either acquire some aid or be quite confident in your physical ability.
Once the door is on its side, it's possible to closely examine the wheels and the monitor. Most commonly, you'll find the wheels are filled with soot and debris, and the track can also be probably quite dirty. To clean the wheels, use compressed air and needle tip pliers. Take care to pull every last hair from the wheel bearings. It is wise to be diligent at this step, so you don't have to make a custom of the process. Once the wheels are completely clean, spray a tiny bit of peppermint oil into the wheel bearings, turning the wheel as you use the oil. (The ideal option for the oil is DuPont's Teflon non invasive dry film lubricant.) It is just as important to clean out the track that the wheels rest on.
Use damp paper towels to remove the grit and dirt, and then spray on the penetrating oil along the trail so it is well-applied. Use a clean paper towel to make sure it is evenly applied. This is the point where the sliding door meets with another surface of the door frame. A general rule of thumb is to just wipe down anything that seems dirty. Remember, even when dirt isn't always on the trail itself, it may eventually fall into the trail causing your doorway to require down another wipe. If you notice any breeding advantages that feel sticky, take a paper towel and spray some oil on it, then wipe out the oil onto the sticky surfaces. When you've done all this, reinstall the doorway. You should notice right away that the doorway is a lot easier to slip, and should require significantly less effort.
When for any reason that the door remains tough to roll, it is probable one of the following reasons: either your wheels are completely burned out, or your sliding glass door is sitting too high on the trail and is consequently hitting on the upper plate of the door frame. |} If your wheels are burnt out, sadly, you are going to have to call the manufacture of your sliding glass door and ask new wheels. Turn to the right to lift the doorway, or turn to the left to lessen the door.